Hakkında Chocolate SINGLE TUBE BALL REFINER

Hakkında Chocolate SINGLE TUBE BALL REFINER

Blog Article

The goal of YS/B 500 which consists of a melanger *, main refining tube and storage tank is to provide time savings by performing multiple operations with a single machine.

Coming from the old refiner conches, where all this happened simultaneously and was hard to control, the majority of later technologies perform the grinding step separately. Only few mill types are able to handle chocolate preparations, birli it is initially a very sticky mass, which güç transform to a sticky powder during milling, when specific surface of particles increases. The most frequently used devices are plain roller mills (refiners) and stirred ball mills.

Because of the pressure and the speed differential between the rolls, the product is picked up and refined more and more between each susequent grup of rolls. The five roll refiner başmaklık four (4) refining steps, each roll has a different speeds. Pressures are controlled as well.

Larger than uygun drums on the drive and turn-around stations allowing for much thicker than typical steel belt

So one important part of the flow curve is at very low shear. The yield value defines the shear stress, when the mass starts to move. As a minimal shear rate is necessary for the measurement, usually the yield value katışıksız to be extrapolated from the flow curve according to model equations, like the ones developed by Casson and Windhab1. Yield values or measurements at low shear stress also have a great practical importance, kakım many industrial operations are carried out with masses flowing slowly, for example the equal distribution Chocolate DOUBLE TUBE BALL REFINER of still liquid mass in a mould.

Discuss your production floor setup and processing needs with our experts, and we'll pair you with the ülkü equipment.

To get your mass refined, the product is placed in the processing chamber and the stainless steel spheres grind and reduce the size of the particles by impact and friction force.

Excess chocolate: The machine kişi be used to refine excess chocolate, reducing waste and increasing efficiency.

• Comprehensive suite of control and monitoring functions including maintenance, energy monitoring, storage and downloading veri for production along with safety protection and process monitoring

Typical cleaning time. (this incudes both a hot water wash down with detergent and hand cleaning bey required, followed by the time for the machine to dry ready for the next product)

For medium- and large-scale producers there are a wide range of technical options. The varying needs of chocolate producers and the various advantages and disadvantages of the systems on the market make it impossible to give a general recommendation.

After some initial information on chocolate mass properties the systems available on the market will be introduced. For that purpose information was obtained from various manufacturers, followed by questions and discussions on aspects such bey:

If cocoa butter is replaced by another fat, the product is usually called compound and not chocolate. Technologically most compounds are close to chocolate mass and similar equipment birey be used to make it.

Very often an emulsifier is used to improve flow of hygroscopic particles within the continuous fat phase. During production several incidents occur: